|
1, independent crew
cab: located at the rear of cabin, fit 4 seats, all
seat are molded and installed with three point seat belt, air respirator
holder. Open door and foot pedal, high-strength glass door in both side. Speak
system
2,Fire
Pump: Mounted in the truck rear, Low-middle pressure fire pump: CB20.10/30.60,
Leading water time ≤ 50s,
within water depth 7m
Low pressure
flow:60L/s/1.0Mpa, middle pressure flow: 30L/s/2.0Mpa
3,pipeline system:
Suction pipe:
Equipped with a backward way pipe DIM:135mm,the water from then tank into the
pump, installed a DIM 135MM manual butterfly valves, tank connection with
pump.
Suction culvert: it
fit water inlet at the rear of pump DIM 150mm,connect the suction pipe, connect
way is Bluetooth connect button.
Water pipeline: at
rear of pump have 4x80mm dim ball control outlet Normal pressure water
At both side of pump have
4x65mm dim ball control outlet Middle pressure water.
1x100mm dim cannon pipeline, flexible
joints,100mm ball control.
Injection line :fit
Dim 50mm circulating water pipe, through the pump directly inject water to
the tank.
Fit 2x80mm dim injection line on
both side of truck.
Drain water: In
order to protect the pump and ball valve, fit the drain water valve at the
lowest place.
Cooling pipes: for
PTO to deal with complex situations of work, fit cooling pipes and control
valve.
4, The power take
off (PTO)
MODEL : sandwich
Manipulation : solenoid valve control
Cooling: Forced
adjustable water-cooled
Lubrication: splash
oil lubrication
5,Fire water-foam
dual monitor
Model: PP48 flow: 48L/S 1.0Mpa, Water range ≥ 65m, Foam
range≥ 55m Rotary angle: 360°horizontal.
Elevation/depression of angle: -15°~+60°
6,The instrument
panel and board equipment:
Instrument panel
located in the vehicle rear pump chamber, with a control panel and provided
with adequate lighting; all the control handle, switch, indicating lamp
nearby have metal corrosion formed Chinese identification; water pipeline
layout and operation steps illustrate, using metal corrosion plate fixed in
the proper position. All illustration plate and signs are persistent and high
adhesion, which can withstand influence due to temperature and climate change
caused; 10 years will not fall off or illegible.
Liquid level,
Tachometer; pressure gauge; vacuum pressure gauge; oil temperature gauge; voltmeter; pump speed regulating device,20V power switch, pneumatic
control valve switch.
7,Tool and pump
store house
Material: Skeleton
made of high quality steel, mask checkered aluminum oxide bonding structure.
Structure: All steel
welded frame structure, around three sides is Aluminum alloy doors, fit
flip-slip pedals, can stand a man working.
|
